Buckeye Cam motion activated wireless camera systems consist of one or more wireless cameras and a base. When a camera detects motion, a picture or video is immediately taken and transmitted to the base. The base must be within 3km of at least one camera.1
A personal computer running the X-Series Network Manager software connects to the base.2 This software is used to receive the pictures or videos and change the camera settings. The following base options are available:
The following table compares the features and requirements of each base type:
Aspect | PCBase | CellBase | NetBase | Camera Base2 |
Connection to a computer | Yes, with USB | Yes, with SIM to internet | Yes, over network IP | No |
Location of computer | Within 3km1 of at least one device | Anywhere in the world | Anywhere in the world | None required |
Change camera settings with... |
X-Series Network Manager Software on PC3 |
X-Series Network Manager Software on cloud4 |
X-Series Network Manager Software on Server |
SD Card |
Receiver pictures with... |
X-Series Network Manager Software on PC3 |
X-Series Network Manager Software on cloud4 |
X-Series Network Manager Software on Server | SD Card |
Trigger trap gate & other sensors from... |
X-Series Network Manager Software on PC3 |
X-Series Network Manager Software on cloud4 Mobile phone anywhere in world |
X-Series Network Manager Software on Server | None |
Maximum number of devices | 255 | 255 | 255 | 255 |
Email option | Yes3 | Yes | Yes | None |
Ongoing fees | None |
Quarterly telecommunication charges5 Annual Interactive Site Subscription6 |
None | None |
Notes |
Lowest cost Can't trigger traps while on the go |
Most flexible Favours portable set ups Requires mobile coverage Trigger traps while on the go |
Can use existing local network Does not require mobile coverage Trigger traps while on the go Must be permanently installed near Sever |
Computer not required |
1 Transmission distance is affected by terrain and other interference. Transmission distance may be increased with optional high gain antennas and/or repeaters.
2 For the camera base, a computer is not required to connect to the base. One camera acts as a base to receive the pictures from all other cameras. The pictures received at the camera base are stored on its SD card.
3 The X-Series Network Manager Software is installed on the PC of which the PCBase is connected. This PC needs to be running 24/7 in order for pictures received to be on forwarded to email recipients. Trap and sensor triggering can only be undertaken at this PC.
4 Requires a specialist SIM card configured with a public IP address and an annual subscription to Buckeye Cam's Interactive Site (cloud service) to enable trap/sensor triggering from a mobile phone while on the go.
5 FeralTech offers customers a number of different telecommunication data plans for the SIM it can provide with the CellBase, billed quarterly in arrears. For further information about our telecommunication services and data plans please vist our Data Plan page.
6 For further details about Buckeye Cam's Interactive Site, including costs please visit our Interactive Site Subscription page.
By sharing your email, you agree to our Privacy Policy and Terms of Use.